Jamie's Blog

I have updated the Google Code repository with updates to integrate GraphViz. It expects the PEAR GraphViz package to be installed.  To install it, issue command:

# You must install the beta package.

sudo pear install Image_GraphViz-beta

If you’d rather not mess with PEAR, download the package, extract the class Image_GraphViz, and alter two two lines of code that depend on the PEAR::System package. It should be trivial to change these. They are both basically calls like this:

// create a temporary file with the prefix "graph_"
$file = System::mktemp('graph_');

One possible replacement:

// will use default tmp dir
$file = tempnam('', 'graph_');

I was working on the Drupal OrgChart module tonight, specifically the rendering of the chart image via GraphViz, and I got stuck for at least an hour on a trifle! I planned to use the PEAR library for GraphViz (Image_GraphViz) and I wrote a function using the class it provides. I run the procedure and get weird errors about not being able to find files and such. After debugging for awhile, I find out that there is a property binPath that is not present. I had expected this to point to my install of GraphViz, which I knew to be especially important because it was in a weird macports directory.

It turns out that I had not installed the version I needed! I didn’t realize the version I wanted was beta, and to download a beta package, you need to explicitly state so in the PEAR command.

sudo pear install Image_GraphViz-beta
#instead of
sudo pear install Image_GraphViz

After downloading the most recent package, it turned out my code worked almost perfectly. What a waste of a night!

The past few days, I also worked on a few other modifications. I removed the requirement for a “subordinate_id” field. Also, I made the profile field names options in the administrative settings page.

The project page is here: http://code.google.com/p/drupal-orgchart/.

I created an org chart module. It interacts with the profile module to display an organizational hierarchy.

From the project description:

An organizational chart that uses the profile.module. Install in your modules directory. Currently, it uses profile fields to build the chart. It assumes that there will be two fields that hold the following data:

* Employee ID – this can be any alphanumeric identifier
* Supervisor ID – this is the alphanumeric identifier pointing to the current user’s supervisor.

In the administrator settings, you may specify the profile field names which correspond to these values.

There are plans to have two other options for loading the data in the future:

1. A custom external table specific to the module
2. Some flat file

Next on the roadmap is graphviz output.

Check it out!

We’ve been using Stikked for an internal pastebin. The current version on Google Code has a few bugs. I modified this code to fix two problems specifically:

1. The Download Code link was not working properly
2. The Short URL functionality was not working, as Snipr had deprecated the version of the API that the program was using

Below is a consolidated diff of the changes. You should be able to use it to apply a patch to 0.5.4 if you are having these issues.

stikked.diff

Index: trunk/system/application/models/pastes.php
===================================================================
--- trunk/system/application/models/pastes.php	(revision 1)
+++ trunk/system/application/models/pastes.php	(revision 2)
@@ -156,14 +156,55 @@
 			$data['snipurl'] = false;
 		}
 		else
-		{
-			$target = 'http://snipr.com/site/snip?r=simple&link='.site_url('view/'.$data['pid']);
+		{
+			// this next blob just copied from snipr's examples,
+			// with some modifications of course
+
+			// REQUIRED FIELDS
+			$sniplink  = site_url('view/'.$data['pid']);
+			$snipuser  = $this->config->item('snipr_user');            // YOUR USER ID REQUIRED
+			$snipapi   = $this->config->item('snipr_apikey');               // FIND IN YOUR "SETTINGS" PAGE
+
+			// OPTIONAL FIELDS
+			$snipnick   = '';            // MEANINGFUL NICKNAME FOR SNIPURL
+			$sniptitle  = $data['title'];  // TITLE IF ANY
+			$snippk     = '';                      // PRIVATE KEY IF ANY
+			$snipowner  = '';                      // IF THE SNIP OWNER IS SOMEONE ELSE
+			$snipformat = 'simple';                      // DEFAULT RESPONSE IS IN XML, SEND "simple"
+			                                       // FOR JUST THE SNIPURL
+			$snipformat_includepk = "";            // SET TO "Y" IF YOU WANT THE PRIVATE KEY
+			                                       // RETURNED IN THE SNIPURL ALONG WITH THE ALIAS
+
+			//----------------------------------
+			// NO NEED TO EDIT BEYOND THIS POINT
+			//----------------------------------
+			$URL        = 'http://snipr.com/site/getsnip';
+			$sniplink   = rawurlencode($sniplink);
+			$snipnick   = rawurlencode($snipnick);
+			$sniptitle  = rawurlencode($sniptitle);
+
+
+			$post_data =  'sniplink='  . $sniplink  . '&' .
+			              'snipnick='  . $snipnick  . '&' .
+			              'snipuser='  . $snipuser  . '&' .
+			              'snipapi='   . $snipapi   . '&' .
+			              'sniptitle=' . $sniptitle . '&' .
+			              'snipowner=' . $snipowner . '&' .
+			              'snipformat='. $snipformat. '&' .
+			              'snippk='    . $snippk
+			  ;
+
+
+			$target = $this->config->item('snipr_link');
 			$ch = curl_init();
 			curl_setopt($ch, CURLOPT_URL, $target);
+			curl_setopt($ch, CURLOPT_POST, true);
+			curl_setopt($ch, CURLOPT_HEADER, 0);
+			curl_setopt($ch, CURLOPT_POSTFIELDS, $post_data);
 			curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);

 			$data['snipurl'] = curl_exec($ch);
-
+
 			curl_close($ch);

 			if(empty($data['snipurl']))
@@ -189,6 +230,7 @@

 	function checkPaste($seg=2)
 	{
+
 		if($this->uri->segment($seg) == "")
 		{
 			return false;
Index: trunk/system/application/config/routes.php
===================================================================
--- trunk/system/application/config/routes.php	(revision 1)
+++ trunk/system/application/config/routes.php	(revision 2)
@@ -46,6 +46,7 @@
 $route['cron/:any'] = "main/cron";

 $route['view/raw/:any'] = 'main/raw/';
+$route['view/download/:any'] = 'main/download/';
 $route['view/options'] = 'main/view_options';
 $route['view/:any'] = 'main/view';
 $route['lists'] = 'main/lists';
Index: trunk/system/application/config/config.php
===================================================================
--- trunk/system/application/config/config.php	(revision 1)
+++ trunk/system/application/config/config.php	(revision 2)
@@ -308,4 +308,16 @@
 $config['rewrite_short_tags'] = FALSE;

+/*
+|--------------------------------------------------------------------------
+| Snipr Settings - Used for short URL
+|--------------------------------------------------------------------------
+|
+| Settings for Snipr API
+|
+*/
+$config['snipr_link'] = 'http://snipurl.com/site/getsnip';
+$config['snipr_user'] = ''; // snipr user name
+$config['snipr_apikey'] = '';
+
 ?>
\ No newline at end of file
Index: trunk/system/application/views/view/download.php
===================================================================
--- trunk/system/application/views/view/download.php	(revision 1)
+++ trunk/system/application/views/view/download.php	(revision 2)
@@ -1,6 +1,6 @@
 <?php

-header('Content-disposition: attachment');
+header('Content-disposition: attachment;filename='.$title.'.'.$lang_code);
 echo html_entity_decode($raw);

 ?>
\ No newline at end of file
Index: trunk/system/libraries/URI.php
===================================================================
--- trunk/system/libraries/URI.php	(revision 1)
+++ trunk/system/libraries/URI.php	(revision 2)
@@ -186,8 +186,15 @@
 	{
 		if ($str != '' AND $this->config->item('permitted_uri_chars') != '')
 		{
-			if ( ! preg_match("|^[".preg_quote($this->config->item('permitted_uri_chars'))."]+$|i", $str))
+			$matches = array();
+			$pattern = "|^[".preg_quote($this->config->item('permitted_uri_chars'))."]+$|i";
+			if ( ! preg_match($pattern, $str, $matches))
 			{
+				echo '<pre>*'.$str.'*<br>';
+				echo 'allowed: '.$pattern.'<br>';
+				var_dump($matches);
+				var_dump(debug_backtrace());
+				echo '</pre>';
 				exit('The URI you submitted has disallowed characters.');
 			}
 		}

There was a recursive join function over at the join documentation on php.net. I wrote a version that was fully recursive on the delimiters, as well as more concise and understandable (IMO).

// original function
<?php
    function joinr($join, $value, $lvl=0)
    {
        if (!is_array($join)) return joinr(array($join), $value, $lvl);
        $res = array();
        if (is_array($value)&&sizeof($value)&&is_array(current($value))) { // Is value are array of sub-arrays?
            foreach($value as $val)
                $res[] = joinr($join, $val, $lvl+1);
        }
        elseif(is_array($value)) {
            $res = $value;
        }
        else $res[] = $value;
        return join(isset($join[$lvl])?$join[$lvl]:"", $res);
    }

// mine
<?php
       function joinr($delim, $value) {
		$cpy = array ();
		foreach ( $value as $val ) {
			if ( is_array ( $delim ))
				$d = count($delim) > 1 ? array_slice($delim, 1) : $delim[0];
			else $d = $delim;
			$cpy[] = is_array($val) ? joinr ( $d, $val) : $val;
		}
		return join (is_array($delim) ? $delim[0] : $delim, $cpy);
	}
$intervals = array(array(5, array(3,4,5)), array(11, 15), array(22, 24));
echo joinr(array(",", "-", "!"), $intervals);
// 5-3!4!5,11-15,22-24
?>

This is a Facebook application I wrote after the Thirteen application. It improves upon the first Facebook App with a new architecture. Animation uses the Facebook Animation library, and rendering is done via Smarty PHP Template engine. Lots of work went into the architecture, and there is even a localization scheme built in.

This application was written primarily as an exercise in creating Facebook Applications. It was very instructive! Here is the project blog if you’d like more details http://thirteengame.blogspot.com/.

It is an adaptation of a web app I originally wrote in 2007. You may play either by logging into Facebook and trying it out, or logging in here http://www.angelforge.org/thirteen/LoginPage.php. To login outside of Facebook, you may either use the user name and password guest or login with your Facebook credentials using Facebook Connect.